The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
- ISO 31-0, Quantities and units — Part 0: General principles
- ISO 148 (all parts), Metallic materials — Charpy pendulum impact test
- ISO 2859-1:1999, Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- ISO 6506 (all parts), Metallic materials — Brinell hardness test
- ISO 6507 (all parts), Metallic materials — Vickers hardness test
- ISO 6508 (all parts), Metallic materials — Rockwell hardness test
- ISO 6892-1, Metallic materials — Tensile testing — Part 1: Method of test at room temperature
- ISO 9712, Non-destructive testing — Qualification and certification of personnel
- ISO 10414-1, Petroleum and natural gas industries — Field testing of drilling fluids — Part 1: Water-based fluids
- ISO 10424-1:2004, Petroleum and natural gas industries — Rotary drilling equipment — Part 1: Rotary drill stem elements
- ISO 11960, Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells
- ISO 13533, Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment
- ISO 13628-4, Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment
- ISO 13678, Petroleum and natural gas industries — Evaluation and testing of thread compounds for use with casing, tubing, line pipe and drill stem elements
- ISO 15156 (all parts), Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production. NOTE In this International Standard, ISO 15156 (all parts) and NACE MR0175 provide the same technical result for a particular provision. In the running text the provision is written in the form “ISO 15156 (NACE MR0175; see Clause 2)”.
- ISO 18265, Metallic materials — Conversion of hardness values
- API [1] Spec 5B, Specification for Threading, Gauging and Thread Inspection of Casing, Tubing, and Line Pipe Threads
- API Spec 6AV1, Specification for Verification Test of Wellhead Surface Safety Valves and Underwater Safety Valves for Offshore Service
- API Spec 7:2001, Specification for Rotary Drill Stem Elements
- API RP 14F, Design, Installation, and Maintenance of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class 1, Division 1 and Division 2 Locations
- ASME [2] B1.1, Unified Inch Screw Threads (UN and UNR Thread Form)
- ASME B1.2, Gages and Gaging for Unified Inch Screw Threads
- ASME B1.3, Screw Thread Gaging Systems for Acceptability: Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)
- ASME B1.5, ACME Screw Threads
- ASME B1.20.1, Pipe Threads, General Purpose (Inch)
- ASME Boiler and Pressure Vessel Code:2004 with 2005 and 2006 addenda, Section V, Nondestructive Examination
- ASME Boiler and Pressure Vessel Code:2004 with 2005 and 2006 addenda, Section VIII, Division 1, Rules for Construction of Pressure Vessels
- ASME Boiler and Pressure Vessel Code:2004 with 2005 and 2006 addenda, Section VIII, Division 2, Alternative Rules
- ASME Boiler and Pressure Vessel Code:2004 with 2005 and 2006 addenda, Section IX, Welding and Brazing Qualifications
- ASNT [3] SNT-TC-1A, Non-Destructive Testing
- ASTM [4] A193/A193M, Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications
- ASTM A194/A194M, Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
- ASTM A320/A320M, Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service
- ASTM A370, Standard Test Methods and Definitions for Mechanical Testing of Steel Products
- ASTM A388/A388M, Standard Practice for Ultrasonic Examination of Heavy Steel Forgings
- ASTM A453/A453M, Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels
- ASTM A703/A703M-08a, Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
- ASTM D395, Standard Test Methods for Rubber Property — Compression Set
- ASTM D412, Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers — Tension
- ASTM D471, Standard Test Method for Rubber Property — Effect of Liquids
- ASTM D1414, Standard Test Methods for Rubber O-Rings
- ASTM D1415, Standard Test Method for Rubber Property — International Hardness
- ASTM D1418, Standard Practice for Rubber and Rubber Latices — Nomenclature
- ASTM D2240, Standard Test Method for Rubber Property — Durometer Hardness
- ASTM E10, Standard Test Method for Brinell Hardness of Metallic Materials
- ASTM E18, Standard Test Methods for Rockwell Hardness of Metallic Materials
- ASTM E92, Standard Test Method for Vickers Hardness of Metallic Materials
- ASTM E94, Standard Guide for Radiographic Examination
- ASTM E140, Standard Hardness Conversion Tables for Metals — Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness and Scleroscope Hardness
- ASTM E165, Standard Practice for Liquid Penetrant Examination for General Industry
- ASTM E428, Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing
- ASTM E709, Standard Guide for Magnetic Particle Testing
- ASTM E747, Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology
- EN [5] 473, Non-destructive testing — Qualification and certification of NDT personnel — General principles
- MSS [6] SP-55, Quality Standard for Steel Castings for Valves, Flanges and Fittings and Other Piping Components — Visual Method for Evaluation of Surface Irregularities
- SAE [7] AMS-H-6875, Heat treatment of steel raw materials
- SAE AS 568A:1974, Aerospace size standard for O-rings
- American Petroleum Institute, 1220 L Street North West, Washington, DC 20005, USA.
- ASME International, 345 East 47th Street, New York, NY 10017-2392, USA.
- American Society for Nondestructive Testing, 4153 Arlingate Plaza, Columbus, OH 43228-0518, USA.
- American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohoken, PA 19428-2959, USA.
- European Committee for Standardization, rue de Stassart 36, Brussels B-1050, Belgium.
- Manufacturers Standardization Society of the Valve & Fittings Industry, 127 Park Street, N.E., Vienna, VA 22180, USA.
- SAE International, 400 Commonwealth Drive, Warrendale, PA 15096-0001, USA.